| Wide Band Acquisition PD channel | |
| PD Technology | UWB - PRPD/TF map |
| PD Channels | 3 biased UWB Channels for active sensors power supply (expandable To 6) |
| Bandwidth | 16kH-30MHz, built in UWB filter |
| Resolution | 10 bit |
| Dynamic range | 75 dB |
| Maximum sampling frequency | 100 MS/s |
| Input voltage range | 1-4000 mVpp |
| Input sensitivity | < 1.0 mVpp |
| Input Impedance | 50 Ohm |
| Recording time length | 1 μs (min) 20 μs (max) |
| Connectors type | BNC |
| Synchronization channel | |
| Input voltage range | 0.2 - 200 VRMS |
| Frequency range | 0.1 ÷ 1000 Hz |
| Input Impedance | 10 MOhm |
| Connector type | BNC |
| Casing | |
| Dimensions | 410 x 345 x 205 mm |
| Weight | < 12 kg |
| IP Degree | IP42 cover Close IP30 cover Open |
| Power Supply | |
| Voltage | 100 50/60 Hz - 240 VAC |
| Outputs for accessories | 5V (max 5 W) via USB-A connector 12 V (max 5W) |
| Battery | 2 x 10,8V, 8 Ah With smart diagnostic system |
| Autonomy | > 8 hours* |
| Operating environmental conditions | |
| Temperature | 0 to 60 °C ** |
| Humidity | 90%, not condensing |
| General | |
| Firmware | updating via USB |
| Certifications | IEC 60270 compliance EN 61326-1 EN 61010-1 |
| Connectivity | |
| Type | For monitoring: Wi-Fi (IEEE 802.11g) + Ethernet Fiber Optics connection, For instrument setup: Bluetooth For maintenance and FM upgrade: USB |